e - phemt mmic acq 62 9 korean facilities : 82 - 31 - 8069 - 3036 / rfsales@rfhic.com all specifications may change without notice us facility : 919 - 677 - 8780 / sales@rfhicusa.com 1 / 6 version 1. 1 product features application s ? small size (4 x 4 mm) ? high g ain ? high linearity ? low cost ? low noise figure ? 30 db agc range ? pb - free/rohs compliant ? ftth (g - pon, ge - pon) ? optical node ? rfog description acq62 9 is designed as low cost trans - impedance amplifiers for many applications including ftth, rfog, optical, triplexers. this mmic is based on gallium arsenide enhancement mode phemt which shows low current draw and very low noise. the data in this spec sheet is valid only for 75 ohm rf vid eo output application. electrical specifications parameter unit min typ max condition frequency mhz 50 - 1000 - gain db - 3 7 .5 - acq62 9 + agc insertion loss 2 db agc vctr = 10 .0v gain flatness db - 1 - input return loss db - - 1 5 - 10 output return loss db - - 12 - 8 output ip3 dbm 3 0 36 - 1db compression point dbm 19 2 2 - noise figure db - 2 4 agc range pin diode (smp1307 - 027) db - 3 0 - vctr = 0v ~ 10 v cso 50 ~ 87 0mhz dbc - - 60 - 55 135 channel flat +3 0 dbmv/ch ctb dbc - - 6 5 - 60 xmod dbc - - 60 - 55 cso 50 ~ 87 0mhz dbc - - 70 - 65 135 channel flat + 2 0 dbmv/ch ctb dbc - - 80 - 7 5 xmod dbc - - 75 - 70 ac q62 9 dc current ma - 13 0 - vdd = + 12 .0v agc dc current ma - 30 - agc vctr = 10 .0v n ote 1. test conditions unless otherwise noted. test freq = 500mhz, t=25 , vdd=5v, 75? system 2. oip3 measured with 2 tones at an output power of +5dbm/tone separated by 1mhz package type : qfn 4x4
e - phemt mmic acq 62 9 korean facilities : 82 - 31 - 8069 - 3036 / rfsales@rfhic.com all specifications may change without notice us facility : 919 - 677 - 8780 / sales@rfhicusa.com 2 / 6 version 1. 1 absolute maximum ratings parameter unit min typ max condition device voltage v dc - 12 14 - operating temperature - 40 - 85 - s torage temperature - 4 0 - 150 - esd human body model - - class 0 - - moisture s ensitivity level - - msl1 - - jun ction t emperature - - 180 - thermal resistance (rth) /w - 30 - - application circuit @ 50 ~ 100 0mhz, 75ohm system * bias of the same color can be configured as the common bias 1 5 10 15 20 input d 60465 a ( balun ) 1 nf 1 nf 1 nf 100 nf 1 nf 100 nf 1 nf 1 nf 1 nf output d 60465 a ( balun ) 1 nf 390 ? 27 pf 1 nf 1 nf 1 nf 100 nf 100 nf 1 nf 560 nh ( wirewound , 2520 type ) 560 nh ( wirewound , 2520 type ) 560 nh ( wirewound , 2520 type ) 560 nh ( wirewound , 2520 type ) smp 1307 smp 1307 100 ? 100 ? 100 ? 100 ? 100 nf 100 nf bias + 12 v bias + 12 v 100 nf atten control bias 0 v ~ 10 v 560 nh ( wirewound , 2520 type ) 100 ? 1 nf 100 ? 390 ? 27 pf atten control bias 0 v ~ 10 v 560 nh ( wirewound , 2520 type ) 100 nf 1 nf 100 nf 100 nf 100 nf 100 nf 1 k ? 30 ? 30 ? 30 ? 30 ? 1 k ? 1 k ? 1 k ? 1 k ? 1 k ? 100 nf 100 nf 100 nf 100 nf 100 nf 100 nf 1 pf 1 pf agc circuit can be changed agc circuit can be changed
e - phemt mmic acq 62 9 korean facilities : 82 - 31 - 8069 - 3036 / rfsales@rfhic.com all specifications may change without notice us facility : 919 - 677 - 8780 / sales@rfhicusa.com 3 / 6 version 1. 1 typical performance @ vdd= 1 2 v, ids = 13 0ma, t=25 , 75ohm system, agc range: vcontrol = 0 ~ 1 0 v gain vs. frequency noise figure vs. frequency input return loss vs. frequency output return loss vs. frequency multi - tone test: 135 ch_flat @ output +3 0 dbmv/ch, vctr = 10 v
e - phemt mmic acq 62 9 korean facilities : 82 - 31 - 8069 - 3036 / rfsales@rfhic.com all specifications may change without notice us facility : 919 - 677 - 8780 / sales@rfhicusa.com 4 / 6 version 1. 1 tem perature test @ - 40 ~ +85 , 50ohm system, nothing agc circuit temperature cycle temperature range: current 0 60 120 180 240 300 360 420 480 540 600 660 720 780 temp 25 25 - 40 - 40 - 40 25 25 25 85 85 85 25 25 25 - 50 - 30 - 10 10 30 50 70 90 temperature( ) 70 80 90 100 110 120 130 140 150 160 170 25 25 - 40 - 40 - 40 25 25 25 85 85 85 25 25 25 current (ma) temp ( ) temperature range: gain temperature range: noise figure 35 36 37 38 39 40 25 25 - 40 - 40 - 40 25 25 25 85 85 85 25 25 25 gain (db) temp ( ) 50mhz 500mhz 1000mhz 0 1 2 3 4 5 6 7 25 25 - 40 - 40 - 40 25 25 25 85 85 85 25 25 25 noise figure (db) temp ( ) 50mhz 500mhz 1000mhz temperature range: input return loss temperature range: output return loss - 30 - 25 - 20 - 15 - 10 - 5 0 25 25 - 40 - 40 - 40 25 25 25 85 85 85 25 25 25 input return loss (db) temp ( ) 50mhz 500mhz 1000mhz - 30 - 25 - 20 - 15 - 10 - 5 0 25 25 - 40 - 40 - 40 25 25 25 85 85 85 25 25 25 output return loss (db) temp ( ) 50mhz 500mhz 1000mhz temperature range: oip3 temperature range: p1db 26 28 30 32 34 36 38 40 25 25 - 40 - 40 - 40 25 25 25 85 85 85 25 25 25 oip3 (dbm) temp ( ) 50mhz 500mhz 1000mhz 17 18 19 20 21 22 23 24 25 26 27 25 25 - 40 - 40 - 40 25 25 25 85 85 85 25 25 25 p1db (dbm) temp ( ) 50mhz 500mhz 1000mhz
e - phemt mmic acq 62 9 korean facilities : 82 - 31 - 8069 - 3036 / rfsales@rfhic.com all specifications may change without notice us facility : 919 - 677 - 8780 / sales@rfhicusa.com 5 / 6 version 1. 1 package dimension (type: qfn4x4) * u nit: mm[inch] | tolerance 0. 2 [.00 8 ] top view side view bottom view pin description pin no f unction pin no function pin no function pin no function 1 amp1_in 6 a mp 2_source 11 amp4_out 16 n/c 2 a mp 1_source 7 amp2_out 12 amp4_out 17 amp3_in 3 n/c 8 amp4_in 13 n/c 18 amp3_in 4 a mp 2_source 9 amp4_in 14 amp3_out 19 amp1_out 5 amp2_in 10 n/c 15 am p3_out 20 a mp 1_source *n/c: not connected * mounting configuration notes 1. ground / thermal via holes are critical for the proper performance of this device. 2. add as much copper as possible to inner and outer layers near the part to ensure optimal t hermal performance. 3. mounting screws can be added near the part to fasten the board to a heatsink. ensure that the ground / thermal via hole re gion contacts the heatsink. 4. do not put solder mask on the backside of the pcb in the region where the board contacts the heatsink. 5. rf trace width depends upon the pcb material and construction. 6. use 1 oz. copper minimum.
e - phemt mmic acq 62 9 korean facilities : 82 - 31 - 8069 - 3036 / rfsales@rfhic.com all specifications may change without notice us facility : 919 - 677 - 8780 / sales@rfhicusa.com 6 / 6 version 1. 1 revision history part number release date version modification data sheet status a cq 62 9 201 4 . 0 4 . 22 1. 1 absolute maximum ratings (delete tj typ) - acq62 9 201 3 .1 2 . 17 1.0 newly created & new datasheet format. - rfhic corporation reserves the right to make changes to any products herein or to discontinue any product at any time without notice. while product specifications have been thoroughly examined for reliability, rfhic corporation strongly recommends buyers to verify that the information they are using is accurate before ordering. rfhic corporation does not assume any liability for the suitabili ty of its products for any particular purpose, and disclaims any and all liability, including without limitation consequentia l or incidental damages. rfhic products are not intended for use in life support equipment or application where malfunction of the product can be expected to result in personal injury or death. buyer uses or sells such products for any such unintended or unauthorized application, buyer shall indemnify, protect and hold rfhic corporation and its directors, officers, stockholders, emplo yees, representatives and distributors harmless against any and all claims arising out of such unauthorized use. sales, inquiries and support should be directed to the local authorized geographic distributor for rfhic corporation. for cus tomers in the us , please contact the us sales team at 919 - 677 - 8780. for all other inquiries, please contact the international sales team at 82 - 31 - 8 069 - 3036 .
|
